Looking for high-end splash back tiles but not in the market for devoting days to installing it? Then you may find the following tips from the experts useful.
Before you begin your splash back installation project , kill the power to all of the walls you will be focusing on. That’s a nice beginning for attempting to complement your kitchen using these tiles. Moreover, take out any electric outlet covers.
Then, the project area must be set. You will need 80- or 90-grit sand paper with this venture. Extensively sand the area for tiling. To wash the rest of the grit and dirt, get a wet cloth and clean the walls down.
Locating The Center of the Wall
The center of the wall ought to be the starting place of your installation. Therefore it is imperative that you find it. Use a level to draw a line through it to create a huge cross after locating it visually.
Prior to deciding to actually repair it towards the wall, you should also be sure of the way in which your installment will look. With this, you can do a loose lay of the tiles on the ground, known as a dry test.
After that, make use of a trowel to use a layer of thin-set adhesive to a small section of the wall starting at the centerline. The adhesive needs to be comb in straight lines in one course rather than swirled ones. The foot of the wall should be your starting place.
Press your glass splash back tiles evenly to the adhesiver. Keep an eye on the middle line to keep your tiles as level as you can. Work in small areas to help you place the tiles before the adhesive dries.
Use a wax pencil to put on mark on the last row of tiles, featuring where they must be cut. Cut them down to size with a glasstile cutter.
Need more information on glass splash back tiles? Do you wish to acquire these form of tiles? TFO concentrates on all sorts of tiles. We have over 350,000 m2 of tiles under one roof. Why not visit us and find out what deals we are able to do for you?