Laying Ceramic Tiles

Laying Ceramic Tiles – The Best Way To Achieve a Professional Result

You’ve prepared the floor, laid the subflooring, and you are now anxious to start laying your ceramic tiles. You will need the correct equipment before you start laying your floor tiles much like what you needed with the preparatory steps.

Tools of the Trade To Use

A lot of the necessary tools you would have already used for the other two steps, aside from, of course, your ceramic tiles. Most of the equipment you need is a square, pen, your trusty tape measure, a drill along with a mixing paddle, buckets for mixing the thin-set with water, and also the same polymer thin-set mortar you used to lay your subfloor. In addition, get tile spacers, a level plus a rubber mallet. To trim the tiles, you’ll need a tile cutter or saw. Rubber work gloves, knee pads and safety goggles are recommended for your safety.fcer

For a proper finish, you may need an aluminum angle for a doorway in which the tiling stops.

With each device or chemical substance utilized, always follow the manufacturer’s instructions and be aware of any applicable building codes.

Just in case there is a small color variation between each box, take your tiles from different boxes and blend them together before you start laying the tiles.

Distribute the thin-set using a trowel in a one meter by one meter area and try to not cover your reference lines. You need to commence at the cross section in the middle of the room in doing this. With this, mix the thin-set in line with the suggested consistency. With the notched edge of the trowel, comb the mortar at a 45 degree angle. Without making swirl patterns, comb it one way. Return any excess to the bucket by picking it up using the trowel.

Along the guide lines, start laying the ceramic tiles. Press them down gently with a slight twist and employ spacers. Every few tiles, lift one up and have a look to see if it’s adhering well. With the trowel, increase the adhesive if there is little or no adhesive used. Get yourself a trowel with bigger notches if it proceeds.

Soon after completing one area, utilize the level to make sure the tiles are even. If not, make use of the mallet to even them out. For edges near cabinets, etc, you will need to cut the tiles to the correct shape.

Keep laying the tiles and before you know it, you will have achieved your desired result.

Tile Factory Outlet specializes in high quality tiles and tile products. Whether you’re looking for tiles for your kitchen, bathroom or any room, the best place to look is at TFO. We have got over 350,000 m2 of tiles ready for immediate pick up, so you are sure to find something that you will love.

Visit our TFO Sydney showroom and see our wide range of tiles at the best prices possible or visit our TFO online tile store today.

0 comments… add one

Leave a Comment